Robinhood Chain in MetaMask: Chain ID 4663 and RPC
Add Robinhood Chain to MetaMask with the correct chain ID 4663, public RPC, and Blockscout explorer, then verify the connection before bridging or swapping.

Robinhood Chain can be added to MetaMask by entering chain ID 4663, the public RPC https://rpc.mainnet.chain.robinhood.com, and the official Blockscout explorer https://robinhoodchain.blockscout.com. Robinhood Chain is an Ethereum Layer 2 built on Arbitrum Orbit technology, and gas is paid in ETH. Once the network is saved, the quickest check is to open the same wallet address in the explorer and confirm the page loads on Robinhood Chain.
Robinhood Chain network settings for MetaMask
If MetaMask asks for a custom network, these are the fields that matter.

| Setting | Value |
|---|---|
| Network name | Robinhood Chain |
| RPC URL | https://rpc.mainnet.chain.robinhood.com |
| Chain ID | 4663 |
| Currency symbol | ETH |
| Block explorer URL | https://robinhoodchain.blockscout.com |
The chain ID is the most important field to get right. If that number is wrong, MetaMask may connect to a different network or reject the setup.
The currency symbol is ETH because gas on Robinhood Chain is paid in ETH. That does not mean every token on the network is ETH. It only means transaction fees use ETH.
If any wallet field looks different later, compare it against the official Robinhood Chain docs or Robinhood’s mainnet support page.
Add Robinhood Chain to MetaMask in five steps
The exact button labels can vary a bit by MetaMask version and device. The general flow is the same on desktop and mobile.
Open MetaMask and go to network settings.
Open the network selector at the top of the wallet, then choose the option to add a new network manually.Enter the network name.
Use Robinhood Chain so it is easy to recognize later in your network list.Paste the RPC URL and chain ID.
Enterhttps://rpc.mainnet.chain.robinhood.comas the RPC URL and4663as the chain ID.Set the gas token and explorer.
Use ETH as the currency symbol andhttps://robinhoodchain.blockscout.comas the block explorer URL.Save the network and switch to it.
After saving, MetaMask should offer to switch networks. Accept that switch so the wallet is actively pointed at Robinhood Chain.
That is enough to make the wallet network-ready. If the goal is to bridge assets in or swap on Robinhood Chain later, this is the setup step that has to be done first.
Check that MetaMask is connected to Robinhood Chain
Saving the network is only half the job. The next step is confirming that MetaMask is actually using it.
A correct connection usually looks like this:
- The network selector shows Robinhood Chain.
- MetaMask does not show an error about an unreachable RPC.
- The wallet expects gas in ETH.
- Your wallet address can be opened on the Robinhood Chain explorer.
A fresh address may still show no assets and no transactions. That is normal. It only means the address has not received tokens or sent transactions on Robinhood Chain yet.
If MetaMask switches back to another network after setup, switch it again manually. A common mistake is adding the chain correctly but then staying on Ethereum or another EVM network in the selector.
Use the Blockscout explorer to verify your wallet
The official explorer for Robinhood Chain is Blockscout. This is the easiest independent check that the wallet is pointed at the right network.

Start by copying your public wallet address from MetaMask. Then paste that address into the search bar on the Robinhood Chain explorer.
If the page opens to an address overview on Blockscout, the network details are working. If the address has never been used on Robinhood Chain, the page may look mostly empty. That is still a valid result.
Later, after a bridge deposit, swap, approval, or transfer, the same explorer page should show those transactions under that same address. This is useful because it confirms activity on-chain instead of only inside the wallet interface.
Blockscout is also where you can verify a transaction hash if something seems delayed. If MetaMask says a transaction was submitted, the explorer is the place to check whether it was mined, is still pending, or failed.
What Robinhood Chain is before you bridge or swap
Robinhood Chain is an Ethereum Layer 2 network built by Robinhood on Arbitrum Orbit technology. For wallet setup, that matters in two practical ways.
First, MetaMask can treat it like another EVM network once the custom settings are added. Second, gas is paid in ETH, so any on-chain action needs some ETH on Robinhood Chain for fees.
That applies whether the action is a transfer, token approval, swap, or bridge claim. Having the right token but no ETH for gas is one of the most common ways a wallet appears ready when it is not.
After MetaMask is configured, a bridge or swap app can prompt transactions from the same wallet. RobinSwap, for example, is non-custodial, which means the wallet signs each transaction directly rather than handing custody to a centralized platform.
Troubleshooting Robinhood Chain in MetaMask
Most setup problems come down to small input errors.
MetaMask says the RPC is invalid
Check for a typo in the RPC URL. The correct public RPC is https://rpc.mainnet.chain.robinhood.com.
Also make sure there are no extra spaces at the beginning or end after pasting. That sounds trivial, but it causes real setup failures.
MetaMask accepts the network but nothing appears
That often means the address has not been funded or used on Robinhood Chain yet. Confirm the address on Blockscout before assuming the setup failed.
The wallet has tokens but transactions fail
On Robinhood Chain, gas is paid in ETH. If there is no ETH on Robinhood Chain in the wallet, transactions can fail even when other tokens are present.
The explorer opens, but balances look wrong
First confirm that the wallet is on chain ID 4663. Then confirm that the address on the explorer matches the address shown in MetaMask.
If both match, the more likely issue is that the tokens have not arrived yet, the wrong token contract was added, or the address was checked on the wrong network before.
Common mistakes
- Entering the correct RPC but the wrong chain ID.
- Adding the network but forgetting to switch to it.
- Expecting ETH on Ethereum mainnet to cover gas on Robinhood Chain.
- Assuming an empty Blockscout page means the network setup failed.
- Trusting copied settings from random posts instead of the official docs or support page.
If something still looks off, compare every field one by one against the official Robinhood Chain references. For a network setup guide, that plain checklist usually solves the problem faster than trying another wallet or repeating the same transaction.
Frequently asked questions
What are the MetaMask settings for Robinhood Chain?
The key Robinhood Chain MetaMask settings are chain ID 4663, RPC URL https://rpc.mainnet.chain.robinhood.com, currency symbol ETH, and block explorer https://robinhoodchain.blockscout.com.
What gas token does Robinhood Chain use?
Robinhood Chain uses ETH for gas. That means transfers, approvals, swaps, and other on-chain actions need ETH on Robinhood Chain to pay transaction fees.
How do I confirm MetaMask is really connected to Robinhood Chain?
The simplest check is to switch MetaMask to Robinhood Chain, copy your wallet address, and open it on the Robinhood Chain Blockscout explorer at https://robinhoodchain.blockscout.com. If the address page loads there, the network connection is set up correctly.
Why does my Robinhood Chain wallet show no balance after setup?
A zero balance after setup usually means the address has not been funded or used on Robinhood Chain yet. It does not automatically mean the network was added incorrectly.
Do I need ETH on Robinhood Chain before bridging or swapping?
Any on-chain action on Robinhood Chain uses ETH for gas. Even if a wallet holds other tokens, it still needs ETH on Robinhood Chain for transaction fees.
Sources
- Robinhood Chain documentation docs.robinhood.com
- Robinhood Chain mainnet support page robinhood.com
- Robinhood Chain Blockscout explorer robinhoodchain.blockscout.com
- Robinhood Chain public RPC rpc.mainnet.chain.robinhood.com
Token prices, history and contracts · Network statistics · Bridge from Ethereum · Bridge from Base
Trade on Robinhood Chain
Swap any token on Robinhood Chain or bridge in from Ethereum, Base, Arbitrum and more. Non-custodial, live quotes.
Not financial advice. Token prices on Robinhood Chain move fast and new pools can lose most of their value within hours. Figures reflect the moment of capture on November 18, 2026. This article was produced automatically by the RobinSwap editorial pipeline from live on-chain data and the public sources listed above. RobinSwap is not affiliated with Robinhood Markets, Inc.